Updating doco

README.md

@@ -1,3 +1,60 @@
 # osc_led
 
 OSC control of LEDs for Jembo
+
+# Install dependencies
+1. Open lxterminal
+2. Copy/paste the following:
+
+
+```
+sudo apt-get install git
+sudo pip3 install osc4py3
+mkdir git
+cd git
+git clone https://git.sav.net.au/Public/osc_led.git
+```
+
+# Setup Reaper, load the template
+Set up reaper to listen on port 9000 and send to port 8000.
+    Control surface mode: OSC
+    Mode: Configure device IP + local port
+    Device port: 9000
+    Device IP: 127.0.0.1
+    Local Listen port: 8000
+    Local IP: doesn't matter [1]
+    Wait between packets: 100ms [2]
+    Allow binding messages to REAPER actions and FX learn: [X]
+
+Notes:
+
+1. I couldn't set the address to listen on in the GUI, but it binds to 0.0.0.0 so it's listening on every local address anyway.
+2. I've set this to 100ms for testing. If this is too long a latency it can be dropped, but the python components are set with thresholds between .5% and 1% of brightness and colour respectively before changing the LEDs so that grandients aren't crazily chatty.
+
+# Start osc_server
+1. Open lxterminal
+2. Run the following:
+
+```
+cd ~/git/osc_led
+./osc_server.py
+```
+
+# Controlling Reaper
+You can do it from reaper, or use some basic controls from osc_client.py
+1. Open lxterminal
+
+
+```
+cd ~/git/osc_led
+./osc_client.py play
+# OR
+./osc_client.py stop
+# OR
+./osc_client.py restart
+```
+
+
+
+
+